Application

Ready to use with no need to thin. Stir thoroughly before use. Final colour will depend upon timber type, previous treatment and the number of coats applied. Ensure timber moisture content is below 15%. Do not apply in temperatures below 5℃ and above 35°C, in damp conditions (when relative humidity is above 85%), or if rain or dew is likely before the product has dried. If using more than one can, it is advisable to mix them together in a larger container or finish in a corner before starting the new can to ensure colour consistency. On previously stained timber, touch up bare areas first and allow to dry. Avoid heavy wear and tear on the decking for a few days after application. At temperatures below 10°C and when used internally with limited air circulation, the drying process will be delayed. On correctly prepared surfaces, three coats evenly with a good quality brush along the grain, avoiding overlaps. Allow 24 hours between coats.

Key benefits

• Microporous allowing the timber to breathe while repelling unwanted moisture
• Translucent Satin finish
• Simple maintenance
• Can also be used as an interior timber coating
• Resists cracking, blistering, peeling and mould
• Long lasting UV and weather resistant
• Wood grain remains visible after application

Technical Information

Finish
Satin Finish
Coverage
Smooth approx. 14-18m2/Litre
Rough approx. 4-8m2/Litre
Thinning
None. Ready for use after thorough stirring. Apply liberally in the direction of the grain using a good quality brush for optimum penetration.
DO NOT use rollers or applicators.