Cetol Filter 7 Plus
Cetol Filter 7 Plus
Product Description
A superior UV resistant oil based coloured finish for windows, doors, fascias and cladding. It remains flexible as timber moves and provides extra protection for timber exposed to maximum weathering. Not suitable for any walk on surfaces or seating. Must be used over a priming coat of Sikkens Cetol HLSe.
Application
Ready to use with no need to thin. Stir thoroughly before use. Final colour will depend upon timber type, previous treatment and the number of coats applied. Ensure timber moisture content is below 15%. Do not apply in temperatures below 5℃ and above 35°C, in damp conditions (when relative humidity is above 85%), or if rain or dew is likely before the product has dried. If using more than one can, it is advisable to mix them together in a larger container for colour consistency. New bare timber needs sanding, cleaning and priming with Cetol HLSe. At temperatures below 10°C and when used internally with limited air circulation, the drying process will be delayed. On correctly prepared surfaces, apply two coats of Cetol Filter 7 Plus evenly with a good quality brush along the grain, avoiding overlaps. Allow 24 hours between coats.
Key benefits
- Microporous allowing the timber to breathe while repelling unwanted moisture
- Translucent Satin finish
- Oil based
- Simple maintenance
- UV and weather resistant
- Wood grain remains visible after application
- Flexible coating which expands and contracts with the timber
Technical Information
Finish
Satin Finish
Coverage
Smooth approx. 10-16m2/Litre
Rough approx. 6-8m2/Litre
Thinning
None. Ready for use after thorough stirring. Apply liberally in the direction of the grain using a good quality brush for optimum penetration.
DO NOT use rollers or applicators.
